language

Blog

Latest industry updates are available here.

Company News

Industry News

Company News

Industry News

Back to Overview

Installation and Maintenance Best Practices for Dismantling Joints

Jan 23,2026

Correct installation and upkeep are paramount for Dismantling Joints to perform their critical function. Improper handling can lead to leaks, joint failure, or system damage. During installation, the joint is positioned between two fixed pipeline components, such as a valve and a pipe flange. The key is to initially tighten the tie-rod nuts evenly while the joint is at its midpoint of adjustment. This provides equal travel for future extension or contraction. Never fully compress or extend the joint during initial installation.
Pipe alignment is crucial; the flanges must be parallel and aligned to avoid bending stresses on the tie-rods. Once the adjacent equipment is securely bolted, the Dismantling Joint's locking nuts can be tightened against the follower flange to secure the setting. For maintenance, the process is straightforward: isolate and depressurize the line, then simply back off the locking nuts and evenly loosen the main tie-rod nuts to create the required gap for removing the valve or pump. Regular inspection should check for corrosion on the tie-rods and sleeve, wear on the gasket, and any signs of leakage. The threaded rods should be kept clean and lightly lubricated. Following these best practices ensures that the Dismantling Joint remains a reliable tool for efficient, cost-effective pipeline maintenance throughout the system's lifespan.

Material Selection and Design Considerations for Metal Bellows Expansion Joints

Rubber Expansion Joints: The Versatile Solution for Vibration and Noise